designed & dimensioned in millimeters[inches] this product manufactured with lead-free processing pb do not scale from this print ADP5-01SP1-13GJ1 end1 end2 5: 50 ohm impedence -01sp1: sma straight plug -13gj1: grf straight jack 10.35 ref .407 7.80 .307 ref 3.66 ref .144 14.60 ref .575 "a" "a" 'a' 2.30 - 0.10 0.00 .091 - .004 + .000 1.15 ref .045 section "a"-"a" sma-cnut-001-h ADP5-01SP1-13GJ1-pin ADP5-01SP1-13GJ1-ins adp5-13gj1-shl position shell +0.10[.004] outside to -0.10[.004] inside body c adp5-01sp1-bdy sma-crng-001 sma-gkt-001 0.29 0.03 .012 .001 detail 'a' scale 12 : 1 c fig. 1 ADP5-01SP1-13GJ1 c sheet of unless otherwise specified, dimensions are in millimeters. tolerances are: decimals angles x.x: 0.3 [.01] 2 x.xx: 0.05 [.002] x.xxx: 0.025 [.0010] material: sma str plug to grf str jack, 50 ohm by: ADP5-01SP1-13GJ1 dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing alvin w 06/27/2010 1 1 sheet scale: 4:1 f:\dwg\misc\mktg\ADP5-01SP1-13GJ1-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 body: becu contact: copper alloy dielectric: ptfe notes: 1. represents a critical dimension. 2. pushout force for center contact: 26.69 n [6.00 lb] min. 3. see plating standard #co-pl-frm-7001-m. revision a
|